CECRI TECHNOLOGIES
1. Aluminium alloy anode for cathodic protection (Based on Indium)
2. Aluminium alloy anodes for cathodic protection (Based on Mercury)
3. Anti-Corrosive treatment for steel reinforcement rods in R.C.C.
4. Magnesium alloy anode for cathodic protection
5. Zinc alloy anode for cathodic protection
6. Corrosion monitoring probe
7. Inhibitor admixture to cement grout for protecting prestressing steel.
8. Passivating solution for protection of prestressing steel while lying in cable duct.
9. Sulphur concrete technology for rapid repair of damaged concrete structures.
10.Cement polymer composite coating system for corrosion protection of reinforcing and prestressing steels.
11.Corrosion inhibiting system for corrosion protection of prestressing and reinforcing steel in sea water.
12.Corrosion resistant Portland Pozzalano Cement
13. Lacquer for corrosion prevention
14. Acid inhibitor for pickling (solid)
15. Low temperature zinc phosphating formulation
16. Rust preventive composition (Phosphating Jelly)
17. Rust converter
18. Rust and scale removing jelly
19. Paint stripper
20. Paint removing jelly
21. Rust converting primer
22. Soak cleaning compound for steel contaminated with oil.
23. Zinc ethylsilicate Primer
24. Corrosion inhibitor formulation for cooling water in Heat Exchange System
25. Zinc rich primer in organic medium
26. Epoxy silicon based heat resistant paint for protecting mild steel structure.
27. Insulation varnish CNSL based
28. Zinc Chromate Primer
29. Airdrying synthetic enamel finish paint
30. Preparation of high build epoxy mastic coating and sealant polyurethane coat for mild steel.
31. Reflective road marking paint
32. Preparation of multicoat protective coating system over concrete surfaces.
33. High Build mastic coating and sealent Polyurethene coat for MS structure in Acid, Neutral or Marine environment.
34. Flourescent and Reflective Traffic sign boards.
35. Neutral paint removing jelly.
36. Epoxy coal tar paints
37. Corrosion inhibiting system for corrosion protection of prestressing and reinforcing steel in sea water.
38. Corrosion resistant Inhibitor admixture for Portland Pozzalano Cement
39. Preparation of clearing solution for boilers and heat exchanges.
40. Inhibitor formulation for and corrosion of metals during oil and gas well acidification
41. Deep discharge stationary lead acid battery
42. Lead acid storage battery for normal temperature operation
43. Lead acid battery (Low temperature operations)
44. Maintenance free lead acid battery (6V-6Ah) for use in emergency light.
45. Lead refining
46. Zinc from Galvanizer’s ash
47. Coating/recoating of anodes employed in ion exchange membrane based chlor-alkali cell for the production of caustic soda, chlorine and hydrogen
48. Coating/recoating of cathodes employed in ion exchange membrane based chlor- alkali cell for the production of caustic soda, chlorine and hydrogen
49. Electrochemical Conversion of Manganate to Potassium Permanganate Process for the
50. Electrolytic production of sodium hypochlorite
51. Process for the production of insoluble anodes for cathodic protection
52. Conductive hydrogel.
53. Sputter etching of Brass valves
54. Digital corrosion meter
55. Pinhole detector
56. P.C. based pulse console for semiconductor deposition
57. Chemical polishing of copper and its alloys
58. Colouring of stainless steel
59. Decorative gold plating solution concentrate
60. Disposable Silver-Silver Chloride Electrodes for ECG applications
61. Electroforming of moulds and dies
62. Electropolishing of stainless steel surgical implants and instruments
63. Hard chrome plating of vacuum brake piston rods
64. Setting up of an electroplating unit
65. Electrochemical de-Arsenator
66. Electrochemical defluoridation of drinking water
67. Electrochemical preparation of iron free aluminium Nitrate
68. Electrolytic generation of Hydrogen
69. Electrochemical Fluorination of octonylchloride to perfluoro octonoic acid.